Parliament hinges can be used all across residential and commercial spaces. These wide leaf hinges are used on both windows and doors to allow these to open fully up to 180 degrees. Curious to know more about parliament hinges? Not sure if parliament hinges are the right fit for your doors? Find out more about parliament hinges below.
What are parliament hinges?
Also known as wide throw hinges, parliament hinges feature wide leaves that protrude from the door, so when open the door will sit flat against the wall. These are also referred to as projection hinges as these project doors away from the frame.
Where to buy parliament hinges?
Parliament hinges can be purchased online at Ironmongery Experts. We stock a large selection of parliament hinges, including parliament hinges 75mm, heavy duty parliament hinges, black parliament hinges and many other parliament door hinges. In addition to wide throw hinges, we also supply a wide range of door hinges, from concealed hinges, such as champagne silver 3D concealed hinges, to ball bearing hinges, such as satin stainless steel 102mm ball bearing hinges.
Why use parliament hinges?
- Overcome deep trim mouldings
- Maximise space
- Wheelchair access
Parliament hinges have been designed to overcome obstacles, such as deep trim mouldings, or to bypass objects, such as pipes or wooden beams. If your property has interior doors that have trouble clearing deep frames or folding back on large baseboards, parliament hinges might be the right option for you. Also, by allowing doors to fold flat against the wall, parliament hinges maximise room space and improve wheelchair access.
Disadvantages of parliament hinges.
Like any other type of hinge, parliament hinges have advantages and disadvantages. There are two main things to note when it comes to using parliament hinges:
- There will be a gap between the door and the door frame when the hinge is fully open.
- There will be a large piece of hinge sticking out of the back of the door when the hinge is closed.
These are more aesthetic concerns than disadvantages.
How are parliament hinges measured?
Please check the example below to see how a parliament hinge, such as the From the Anvil 102mm x 75mm x 125mm is measured.
How to install parliament hinges.
Depending on the application, installation may vary. The instructions below are for reference only. If you require further advice, contact a professional. We recommend choosing high-quality parliament hinges, including matt black 100mm x 100mm parliament hinges and polished chrome 102mm x 152mm parliament hinges.
Materials:
- Parliament hinges
- Screws
- Drill
- Drill bit
- Chisel
- Hammer
- Pencil
How to:
Step 1 – Place the hinges on the door to determine how many hinges you will require and the right positioning for them. Draw a line at the top and bottom of the hinge on the door and door frame. Outline the hinge flat and mark the depth of the hinge.
Note: As a rule of thumb at least one hinge needs to be placed on the door every 30 inches in height.
Step 2 – Remove the door and place it on its side. With a chisel and hammer, cut the edges of the hinges and then cut along the length of the hinge until you’ve reached the desired depth. Do the same on the door frame for each door hinge.
Step 3 - Fit the hinges in the recess and trim more of the door or door frame if needed.
Step 4 – Place the hinges on the surface. Drill pilot holes for the screws on both the door and the door frame.
Step 5 – Screw the hinge flat on the door first. Then, screw the hinges on the door frame. Swing the door to test how it operates.
Disclaimer
At Ironmongery Experts we strongly advise that you always use safety precautions when undertaking a DIY project and ensure that you read and follow the manufacturer’s instructions when using any building materials, products or tools for your projects.
We try our best to provide clear and correct instructions within our articles, however, please note that this information should only be used as a general guide and some information within the text may not be entirely accurate.
When using our articles for information and advice, please note that it is your SOLE RESPONSIBILITY to determine whether you have the competence and knowledge to undertake the task that you want to complete.
Before starting a DIY task, it is essential that you are aware of any existing building, gas, water and electrical works regulations. If you have any reservations, we recommend that you complete additional research or contact the appropriate professional body.
We also strongly recommend that a qualified tradesperson completes relevant safety checks on any DIY work you have completed.