Perhaps your gate is starting to fall forward. This might mean that the hinges are not strong enough to hold the heavy gate in place. Maybe your gate hinges are old, worn and rusty. Either way, it’s time to replace the hinges. Good quality hinges will keep your garden gate in proper working conditions for many years to come.
At Ironmongery Experts, we supply a variety of t hinges for sale. Our range of tee hinges varies in design, finish and sizes to meet any and all hinge requirements you might have. From heavy-duty stainless steel t hinges and small pewter tee hinges to black gate hinges and more.
What type of hinge should be used for a gate?
When purchasing a hinge for a garden gate, it’s essential to consider the size and weight of the gate. Small hinges will not offer enough strength and stability for heavy gate doors. We recommend purchasing an exterior tee hinge that features a length of at least half of the width of the gate. Exterior tee hinges are suited to withstand the elements and are, therefore, ideal for garden gates. Some exterior t hinges available at Ironmongery Experts include:
300mm Marine Grade A4 316 Stainless Steel Weighty Scotch Tee Hinges
Pair From the Anvil External Beeswax 560mm Penny End T Hinges
Box 10 Pairs 450mm Premium Black Strong Tee Hinges
How to replace gate hinges.
Materials needed:
- Hinges
- Drill
- Drill bit
- Wedge
- Primer
- Paintbrush
Step 1. Add a wedge under the gate to support it. This will ensure the gate stays in place while you remove the hinges one by one.
Step 2. Unscrew the top hinge. If the timber underneath the hinge is bare, apply primer with a paintbrush for a cleaner aesthetic and let it dry.
Step 3. Once the primer has dried, place the new hinge on the gate. Make sure the hinge is level and attach the side of the hinge that sits on the fence post first. Use a drill to fasten the screws in place.
Step 4. Ensure the gate is aligned and level on the top and bottom. Then, attach the remaining screws to the gate door.
Step 5. Repeat the same process for the bottom hinge. Once you’ve installed all hinges, you can remove the wedge and test the opening and closing of the gate.
Disclaimer
At Ironmongery Experts we strongly advise that you always use safety precautions when undertaking a DIY project and ensure that you read and follow the manufacturer’s instructions when using any building materials, products or tools for your projects.
We try our best to provide clear and correct instructions within our articles, however, please note that this information should only be used as a general guide and some information within the text may not be entirely accurate.
When using our articles for information and advice, please note that it is your SOLE RESPONSIBILITY to determine whether you have the competence and knowledge to undertake the task that you want to complete.
Before starting a DIY task, it is essential that you are aware of any existing building, gas, water and electrical works regulations. If you have any reservations, we recommend that you complete additional research or contact the appropriate professional body.
We also strongly recommend that a qualified tradesperson completes relevant safety checks on any DIY work you have completed.
