Rutland Power Supply Unit for Electromagnetic closer | PSU.1224.9
This product is a four way regulated Power supply unit to connect electromagnetic door closers
to the fire alarm. The control module offers the options to switch in a fail-safe or fail-secure
manner using either volt-free or a 24VDC trigger.
Mild steel construction
White powder coated
Switch-mode technology
Four way regulated power supply
Output can be fail-safe or fail-secure
Full electronic protection
Short circuit protection
24VDC regulated output
Fused output
Full current to load
End-of-Life: This product can be returned to Rutland for WEEE regulations
One PSU can take up to 4 Responders or Firetraks (see caveat below)
Suitable for use with Rutland Firetrak & Responder24 closers
Manufactured by Rutland
Technical specification (see image):
Dimensions inc cover: W200 x H200 x D65mm
Max Load: Up to 4/5 Responders or Firetraks
Max Amp 4A
CAVEAT - Rutland PSU is recommended to be suitable for 4 E-mag devices (Responder 24 and
FireTrak), however it is recommended that the fitter consults with the cable voltage drop table
due to the fact that cable sizing and length can affect voltage drop. It is the responsibility of the fitter to ensure the correct cable thickness is used for the situation in hand.
When E-mag door closers are to be interfaced with fire & smoke alarm systems they are to be installed by competent installers in accord with BS 7273-4 code of practice.
